Is Your Sewing Machine Skipping Stitches?

Using a sewing machine to achieve all of your crafting goals is an excellent way to take your projects to the next level. But using a sewing machine can pose all sorts of challenges. One such challenge that you will learn to overcome with time is skipping stitches. You don’t want to compromise your project piece by continuing to use your sewing machine. Instead, continue below to learn why this might happen and how to fix it right away.

Sewing Professional Indianapolis Indiana 317-845-9077
Sewing Professional Indianapolis Indiana 317-845-9077

Why Sewing Machines Skip Stitches

Before you begin to troubleshoot your sewing machine problem, it helps to review the most common reasons why sewing machines tend to skip stitches. This knowledge will give you a place to launch in terms of diagnosing the underlying issue. Typically, sewing machines will start skipping stitches if the needle is old, you are using an incorrect needle, or your tension settings are wrong. Sewing machines can also skip stitches are due to tension disk, spool, and/or bobbin are not correctly attached or positioned.

Old Needles

If your sewing machine needle is too old, it can lose quality. Around 7 hours of sewing time should be the limit per needle. To follow the general rule of thumb, use a brand new needle for every new project you start. You never want to use a dull or bent needle in a sewing machine.

Wrong Needles

Not only should your sewing needles be fresh, but they should be the right type. Use the correct sewing needle for the particular type of fabric you are working with. For instance, if you are sewing jersey or spandex fabrics, you would need to use a stretch/ball point sewing machine needle. Additionally, be sure the needle is set within the sewing machine. If it is loose, it will skip stitches.

Tension Setting Problems

The tension setting must be just right for optimal sewing machine results. To fix this issue, adjust the tension dial little by little before each test run. It might be necessary to adjust tension for the bobbin as well if you have one in a metal case. Your sewing machine manual can also offer up some troubleshooting advice for tension setting difficulties.

Tension Disk, Spool, and Bobbin

If all else fails, you may need to re-thread the machine entirely and wind the bobbin. First, check that the thread is actually in the tension disc. Then check that the spool is positioned properly. Last, check on the bobbin. It should be in the right place and properly threaded.

Are you having trouble finishing your sewing piece or project? Contact Yong’s Alterations at 317-845-9077 for Indianapolis Indiana alterations and tailoring services at the most affordable prices around. We can help with home décor, costumes, upholstery, apparel, and more.

Related Posts:

Sewing Machine Tension Balancing Tips for Beginners
4 Ways to Prevent a Sewing Machine From Swallowing Fine Fabric
How to Properly Feed the Dog on Your Sewing Machine